Language

info@opia.eco

Contact

Share this page

Copy the link, scan the QR code with your phone or send it through an app.

Upcoming trade fair

Meet us at MEDICA 2026

16–19 November · Messe Düsseldorf. Let's talk about Q0 BIO, Q0 ECO and our specialist brands at our stand.

Time until the fair opens

  1. --days
  2. --hours
  3. --minutes
  4. --seconds

The fair is open now; let's meet at our stand.

MEDICA 2026 has ended. Thank you for visiting.

Sustainability

Building sustainability on method, not claims

We explain openly how we address our impact, from source selection to packaging, and under which conditions we share a result.

Two futures

Life is a balance of opposites

The same morning, two different choices. Every choice leaves an impact; in textiles, too, two paths lie ahead.

  1. 01Same beginning

    The same horizon

    Both futures begin on the same morning: the same hills, the same daylight. What makes the difference is how production is set up.

  2. 02Linear

    Take, make, waste

    Raw material of unknown origin, a product used once, and in the end, waste. In the linear model, value is used up along with the product.

  3. 03Circular

    Know the source, use it long, recover it

    Material of known origin, a long service life and recovery. In the circular model, the end of one product can be the beginning of the next.

  4. 04The choice

    Which future would you choose?

    Drag the line and see the two futures side by side. From raw material choice to packaging, we are moving towards the circular one, and we explain the method behind it.

Four principles

  1. 01

    Knowing the source

    The material route each product comes from and the source of its raw material are recorded together with the product.

  2. 02

    Measuring at product level

    Results such as carbon, water or end of use belong to the measured product and its functional unit, not to the company as a whole.

  3. 03

    The right use model

    Single-use and reusable models are compared according to the hygiene and care conditions of the setting.

  4. 04

    Showing the scope

    Every document is shared together with the product it covers, the method, the date and its validity.

What do we look at across the life cycle?

A life cycle approach assesses a product's impact across its whole journey rather than at a single stage. At each stage we ask:

  1. 01

    Raw material

    What is the source, and how is it documented?

  2. 02

    Production

    Which processes run, and with which inputs?

  3. 03

    Packaging

    How much packaging is needed, and how can it be reduced?

  4. 04

    Logistics

    How is the product transported, and at what load?

  5. 05

    Use

    How many times is it used, and under which care conditions?

  6. 06

    End of use

    How is the product separated, and where does it go next?

Packaging and logistics

We treat packaging as part of the product. On a project-by-project basis, we assess reducing unnecessary material, reusable cartons and lightweight packaging options, and product designs that reduce the transport load.

A living carton: used again and again

A carton's job need not end when the product arrives. Instead of single use, we are developing the idea of a reusable carton that can take on a new job after delivery.

A packaging option assessed per project; size and material are set for each project.

  1. 01A paintable toy box for children
  2. 02A small play table for picnics
  3. 03An archive box at home or in the office
  4. 04A boot organiser in the car

The global framework

The Paris Agreement was adopted at the Conference of the Parties (COP) to the UN Framework Convention on Climate Change and sets the goal of limiting the rise in global temperature. The parties meet at the COP every year to review progress. For us, this framework is not a slogan; it is a reference for making product measurements and improvement steps comparable.

Carbon, told by measurement

A company's carbon footprint and a product's carbon footprint are separate measurements; one never stands in for the other. We share each with its method, scope and document.

  1. Completed

    The company's footprint

    ISO 14064-1

    Our first corporate carbon footprint calculation has been completed for the 2025 base year. 2025 was a trial and sample year with no sales or shipments, so comparisons with later years will use per-unit or per-kilogram indicators.

  2. Completed

    A product's footprint

    ISO 14067 · TÜV Austria · TR-PCF-671 · August 14, 2026

    The cradle-to-gate carbon footprint of one of our products has been verified by TÜV Austria. The result belongs only to the product named in the document; it is not carried over to other products or to the company as a whole.

  3. Planned

    The next step

    ISO 14068-1

    We plan to build a measurable reduction plan following the ISO 14068-1 approach. Once the work begins, its status will be updated on the Compliance & trust page.

Reading a carbon claim

When you see a carbon or climate claim for a product, ask for the following. We share our own claims with the same information.

We do not make neutrality claims that rely on offsetting; we prefer to describe the measured value, its scope and the reduction steps.

  1. 01For which product or model?
  2. 02Measured by which method (e.g. ISO 14067)?
  3. 03With which report or document number?
  4. 04When was it done, and until when is it valid?
  5. 05What is the scope: cradle-to-gate or the whole life cycle?
Compliance & trust

PioPi Fidancılık

The nursery initiative in our ecosystem: Paulownia and fruit sapling production, and re-greening land that has lost its forest character.

Meet PioPi Fidancılık

Compliance & trust

Independent bodies we work with on testing, certification and verification

The listing of a body here does not mean that it has certified every one of our products; each result applies only to the product named in the report.

Compliance & trust

TÜV SÜD

Our work with this body

  • ISO 9001Quality management systemCompleted
  • ISO 14001Environmental management systemCompleted
  • ISO 45001Occupational health and safety management systemCompleted
  • ISO 10002Customer satisfaction and complaints handlingCompleted

The listing of a body here does not mean that it has certified every one of our products; each result applies only to the product named in the report.

Compliance & trust

TÜV AUSTRIA

Our work with this body

  • ISO 14067Product carbon footprint verificationCompleted

The listing of a body here does not mean that it has certified every one of our products; each result applies only to the product named in the report.

Compliance & trust

SZUTEST

Our work with this body

  • (EU) 2016/425PPE Regulation (EU) 2016/425, Modules B and DIn progress
  • (EU) 2017/745Medical Device Regulation (EU) 2017/745In progress

The listing of a body here does not mean that it has certified every one of our products; each result applies only to the product named in the report.

Compliance & trust

HOHENSTEIN

Our work with this body

We carry out testing and verification with this body by project and document scope. Every completed result is listed with its body and date.

The listing of a body here does not mean that it has certified every one of our products; each result applies only to the product named in the report.

Compliance & trust

EUROFINS

Our work with this body

We carry out testing and verification with this body by project and document scope. Every completed result is listed with its body and date.

The listing of a body here does not mean that it has certified every one of our products; each result applies only to the product named in the report.

Compliance & trust

SGS

Our work with this body

We carry out testing and verification with this body by project and document scope. Every completed result is listed with its body and date.

The listing of a body here does not mean that it has certified every one of our products; each result applies only to the product named in the report.

Compliance & trust

İTÜ

Our work with this body

We carry out testing and verification with this body by project and document scope. Every completed result is listed with its body and date.

The listing of a body here does not mean that it has certified every one of our products; each result applies only to the product named in the report.

Compliance & trust

TSE

Our work with this body

We carry out testing and verification with this body by project and document scope. Every completed result is listed with its body and date.

The listing of a body here does not mean that it has certified every one of our products; each result applies only to the product named in the report.

Compliance & trust

Documents and their status

We publish our management system certificates, environmental verifications and ongoing conformity processes, together with their status, on the Compliance & trust page. If you have a question about a document or its scope, please write to us.

Contact

Let's assess your project together

Share your need, your sector and your target timeline; we will direct you to the right team and specialist brand.

Talk to us